Friday, September 27, 2013

YAMAHA HS5 POWERED STUDIO MONITOR



Pricelist : Rp.1.750.000,- perbuah.

2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter.
  • 54Hz - 30kHz frequency response
  • 45W LF plus 25W HF bi-amp system for high-performance 70W power amplification
  • ROOM CONTROL and HIGH TRIM response controls
  • XLR and TRS phone jack inputs accept balanced or unbalanced signals

General specifications

Speaker type 2-way bi-amp powered studio monitor
Frequency range (-10dB) 54Hz - 30kHz
Components LF 5" cone
HF 1" dome
Crossover 2kHz
Output power 70W (LF:45W, HF:25W)
I/O connectors XLR3-31 type (balanced), PHONE (balanced)
Power consumption 45W
Shape Bass-reflex type
Cabinet material MDF
Dimensions W 170mm (6.7")
H 285mm (11.2")
D 222mm (8.7")
Net weight 5.3kg (11.7 lbs.)
Others LEVEL control (+4dB/center click) , EQ: HIGH TRIM switch (+/- 2dB at HF) / ROOM CONTROL switch (0/-2/-4 dB under 500Hz)

PEAVEY 32FX FX™ Series Mixer


List : 1.460 USD

Overview

FX Series mixers feature new, Peavey-exclusive technology to enhance live sound reproduction and project studio recording, including Silencer mic preamps, which allow very high gain with low noise and distortion for crystal-clear signal reproduction. The four pre-fader auxes per channel provide 4 monitor mixes while the two post-fader auxes are ideal for adding effects (those built-in or outboard). These mixers also include dual DSP engines that allow multiple simultaneous effects assignable to any channel via aux 5/6 on DSP engine 2. Onboard effects include reverb,reverb enhanced, delay, compression,expander, de-esser, chorus, flanger, tube emulator, vocal enhancer and gate. Up to 3 processors can be chained together on each of the two available Effects windows. The digital output processing section includes Feedback Ferrets, dual 5- band Parametric EQ or dual 27-band Graphic EQs, digital delay lines, and dynamics/limiters. The output section can be configured forStereo, Dual mono or with a built-in electronic crossover in Subwoofer mode. The mixers' dual USB ports, which allow streaming of digital audio directly to a computer or memory stick, also feature exclusive, built-in MP3 compression. You can record your rehearsals, songwriting sessions or live performances directly to an inexpensive USB stick ... no other hardware needed and then transfer them to your computer to burn CDs or to transmit electronically.

Features

  • 2 stereo channels with dual mic/line inputs
  • Dual DSP engine with digital effects and output processing including Feedback Ferret®, 27-band GEQ/5-band PEQ, delay and limiter
  • USB "A" connection to record directly to or playback from memory stick
  • USB "B" connection for digital audio output and input
  • 3-band EQ with sweepable mid-frequency and fixed low cut filters
  • 48 volt phantom power
  • 6 AUX sends
  • 4 sub groups
  • Switching power supply
  • 28 "Silencer™ Mic Pre" XLR inputs
  • Weight Unpacked: 34.00 lb(15.422 kg)
  • Weight Packed: 45.00 lb(20.412 kg)
  • Width Packed: 13.12"(33.3248 cm)
  • Height Packed: 36.12"(91.7448 cm)
  • Depth Packed: 22.75"(57.785 cm)

Tuesday, September 24, 2013

ROLAND KC-880 Stereo Mixing Keyboard Amplifier







KC-880: Stereo Mixing Keyboard Amplifier

High-Powered Performance for the Entire Band
The new flagship of the KC amp series is packed with high-performance features. With five channels of stereo input, 320 watts of power and Roland’s famous DSP effects built in, the KC-880 is a portable powerhouse for keyboards, vocals, and more.
  • Flagship stereo keyboard amplifier with five channels of stereo input
  • 320-watt stereo power amplifier, 12-inch woofers and two horn tweeters
  • DSP effects (Reverb, Chorus, Tremolo, Rotary)
  • Flexible I/O (XLR mic input, stereo XLR line outputs, headphone out), Stereo Link for chaining multiple KC-880s

Specs

Rated Power Output
320W (160W +160W)
Nominal Input Level (@1 kHz)
CH1 (MIC/LINE): -50–20 dBu
CH2–4 (LINE): -20 dBu
AUX IN/MONITOR IN: -20 dBu
STEREO LINK IN: 0 dBu
Nominal Output Level (@1 kHz)
LINE OUT (XLR type, Phone type): +4 dBu
STEREO LINK OUT: 0 dBu
Speakers
30 cm (12 inches) Woofer x 2, Horn Tweeter x 2
Controls

CH1, Volume Knob, EFX Button, CH2, Volume Knob, EFX Button, CH3, Volume Knob, EFX Button, CH4, Volume Knob, EFX Button, EFX Knob, SPEED Button

AUX IN/MONITOR IN, LEVEL Knob, MUTE, SPEAKER Button, LINE OUT Button, EQUALIZER, LOW Knob, MIDDLE Knob, HIGH Knob, PHONES VOLUME Knob, VOLUME Knob, POWER Switch, GND LIFT Switch
Indicators
EFX x 2, POWER
Connectors
CH1 Input Connector (XLR type), CH1-4 Input (L/MONO, R) Jacks, (1/4” phone type), AUX IN/MONITOR IN: AUX 1 Input (L/MONO, R) Jacks, (1/4” phone type), AUX 2 Input (L/MONO, R) Jacks, (RCA phono type), AUX 3 Input Jacks (Stereo miniature phone type), PHONES Jack (Stereo 1/4” phone type), STEREO LINK OUT (L, R) Jacks, (1/4” phone type), STEREO LINK IN Jack (1/4” phone type), LINE OUT (L, R) Jacks (1/4” phone type), LINE OUT (L, R) Jacks (XLR type), FOOT SW Jack (TRS phone type)
Power Supply
AC 117 V, AC 230 V, AC 220 V, AC 240 V (50/60 Hz)
Power Consumption
98 W
Accessories:
Owner’s Manual, Caster x 4
Size and Weight ( including casters )
Width
734 mm
28-15/16 inches
Depth
445 mm
17-9/16 inches
Height
590 mm
23-1/4 inches
Weight
44.0 kg
97 lbs. 1 oz.
Size and Weight ( excluding casters )
Width
734 mm
28-15/16 inches
Depth
445 mm
17-9/16 inches
Height
536 mm
21-1/8 inches
Weight
44.0 kg
97 lbs. 1 oz.

Thursday, September 5, 2013

ARX EQ260


Pricelist : Rp. 17.300.000,-


The ARX EQ260 is a Dual Channel 30 band Graphic Equalizer designed to give you the flawless professional performance you demand, yet take up minimal rack space. It is neatly housed in a compact 3 RU all steel chassis.
Quality you can feel as well as hear
Each channel on the silver grey front panel features 30 of our new Extended Resolution long throw, centre grounding faders, switchable to either ±15dB or ±6dB, for the ideal combination of high fader resolution and maximum cut and boost. A protective dust cover is also fitted to each fader.
As well, there is a Gain recovery control with up to +10 dB of gain; a Clip LED to indicate circuit overload, a sweepable 20-200Hz High Pass filter, and an IN/OUT hardwire bypass switch which removes the EQ260 completely from the signal path.

Accurate Constant Q Circuitry
Internally, the EQ260 features innovative Constant Q circuitry. What makes this so good? Well, it means that the graphical representation of the sliders on the front panel more accurately reflects the changes you make to the sound, as compared to traditional EQ designs.
In other words,
'what you see is what you get.' Combine this circuitry with the 60 individual filters in the EQ260, and you have an equalizer that is unsurpassed for total accuracy.
Additionally, at the 0dB slider position each filter is, in effect, removed from the circuit to further enhance the EQ260's low noise figures.

Balanced Inputs and Outputs
On the rear panel, the EQ260 has true differential Balanced Inputs and Servo Balanced Outputs, on both XLR as well as convenient TRS jack connectors.
There is also an audio ground lift switch to isolate the audio ground from the chassis ground.

Universal AC Power
AC power range is a universal 100 to 120V or 220 to 240V AC, and is connected to the unit via a removable power lead and standard 3 pin IEC connector, with built-in fuse and voltage switch.
At ARX, we know that there's no shortage of other Equalizers out there! But we believe the ARX EQ260 delivers superlative, uncompromising audio quality that will truly enhance any pro audio application. Its accuracy, compact High Density design, cool good looks, and most of all its superb sound will make it the dual channel graphic equalizer of choice for demanding engineers around the world.

FBT MITUS 121 SA


Pricelist : Rp. 31.645.000,-

1200W - 137dB SPL Processed Active Subwoofer

·         Large vented bass-reflex subwoofer, extremely deep low frequency extension
·         530 mm (21’’) custom B&C neodymium high excursion subwoofers with 115 mm (4.5’’) coil
·         Frequency response from 29Hz to 100Hz
·         Class D amplifiers delivering 1200Wrms
·         DSP with 8 presets, cardioids and infra configurations, delay
·         Control panel with XLR input and link, volume, presets, delay, phase 0°-180°, ground-lift
·         18 mm (3/4’’) birch plywood enclosure with large reflex vent free from turbulence, scratch resistant black paint
·         M20 Stand socket and six FBT design aluminium handles
·         Optional 4 swivel-mount casters 80 mm (3.15’’) on request
·         Perfect low-frequency extension for the MITUS range and ideal companion for the MITUS 206LA line array for ground stack applications with optional MT-B206 metal base

FBT MITUS 206 LA


Pricelist : Rp. 22.450.000,-

600W + 300W - 134dB SPL Active precision coverage vertical array

·          2 x 6.5’’ (165 mm) B&C neodymium woofers with 1.7’’ (44 mm) coil
·          1.4’’ (36 mm) exit B&C neodymium driver with 2.5’’ (64 mm) coil
·          Frequency response from 68Hz to 20KHz
·          Latest class D built-in amplifiers, 600Wrms to the LF and 300Wrms to the HF with switch mode power supply
·          DSP on-board with 8 presets, +/- 5db HF level control for accurate amplitude shading
·          Control panel with XLR input and link, volume, presets, HF level, HP-filter, ground-lift
·          100° horizontal waveguide with very low distortion and near flat wavefront up to 18Khz
·          High impact polypropylene  gas-injected enclosure withintegrated rigging hardwareadjustable with 0° to 10°angle between cabinets at2° step
·          Ideal for small to medium sized application, from single pole mounted loudspeakers with 100°H x 10°V coverage
·          to multiple cabinet full sized line array, the MITUS 206LA maybe used also in  outdoor applications where the system is not directly exposed to the elements
·          Wide range of hardware accessories for flying and ground stacked configurations
·          Very lightweight, only 14Kg

LinkWithin

Related Posts Plugin for WordPress, Blogger...