Thursday, June 12, 2014

P-Audio P180/2242 18" NEW DESIGN

SALE ----- SALE ---- !!!!! 
Hubungi / Datang ke Toko Sekarang Juga untuk mendapatkan Harga Promosi.

Pricelist Rp. 2.700.000,-

P-Audio P180/2242 New Design
The P Audio P180/2242 is a high output low frequency transducer designed with a vintage voicing. The P180/2242 is an upgraded design that features many of P Audio s new technologies and performance upgrades. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio.

The P180/2242 employs a large 4 inch(101.6mm) diameter voice coil and has been upgraded to an AES rated 1000 watts of continuous power handling and a full 4000 watts of peak rated power handling when sufficient amplifier headroom is available. The P180/2242 utilizes P Audio s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audio s precision flat wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling. The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. 

The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design further enhances system mechanical control and reliability. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
Features:
  • 4” Large Format Voice Coil 
  • 4000 Watts Peak Power Handling 
  • Active Balanced Cooling 
  • Integrated Demodulation Rings 
  • Double Spider Design 
  • Ferrite Magnetics 
  • Precision Rectangular Ribbon Wire Geometry 
  • Die Cast Aluminum Chassis
Specification:
General Specification

Nominal diameter
457 mm/18 in
Power rating
1000 W(AES)
Nominal impedance
Sensitivity
97 dB
Frequency range
30-500 Hz
Chassis type
Cast aluminum
Magnet type
Ferrite
Magnet weight
2.85 kg/100.6 oz
Voice coil diameter
101.6 mm/4.0 in
Coil material
CCA-R
Former material
Glass fiber
Cone material
Paper
Surround material
Cloth
Suspension
Double
X-max
6.75 mm/0.27 in
Gap depth
13.9 mm/30.6 in
Voice coil winding width
25.5 mm/1.0 in
Net Weight
15.9 kg/35.1 lb
Packing Dimension WxDxH (mm)
Shipping Weight
505mm x 505mm x 270mm
15.9 kg/33.7 lb
Small Signal Parameter Data
Re
5.7
Fs
37 Hz
Mms
185.81 g/6.55 oz
Mmd.
159.23 g/5.62 oz
Qms
6.33
Qes
0.51
Qts
0.48
Vas
231.72 lt/8.18 ft
BI
22.0 Tm
Cms
9.5e-05 m/N
Rms
6.82 Ns/m
Le (at 1kHz)
0.64 mH

LinkWithin

Related Posts Plugin for WordPress, Blogger...