Monday, January 2, 2012

CROWN XLS Series Power Amplifier






Pricelist :
XLS 202 Rp. 4.250.000,-
XLS 402 Rp. 4.895.000,-
XLS 602 Rp. 6.365.000,-
XLS 802 Rp. 7.175.000,-
XLS 5000D Rp. 17.270.000,-


Minimum Guaranteed Power
per channel, both channels driven

XLS 202
XLS 402
XLS 602
XLS 802
XLS 5000
1 kHz with 0.5% THD
Stereo, 2 ohms (per ch.) -- -- -- -- 2,500W**
Stereo, 4 ohms (per ch.) 300W 450W 600W 800W 1,800W*
Stereo, 8 ohms (per ch.) 200W 300W 380W 500W 1,100W*
Bridge-Mono, 8 ohms 600W 900W 1,200W 1,600W 3,600W*
Bridge-Mono, 4 ohms -- -- -- --

*750W for
100V
models
5,000W**

*with 0.1% THD
**with 1% THD



  • Reliable design incorporates many popular features
  • Housed in a rugged, all-steel 2U chassis (3U in the XLS 5000)
  • Efficient forced-air fans prevent excessive thermal buildup
  • Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
  • Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel.
  • Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
For product availability and pricing please contact your local dealer.

Specifications

Sensitivity (volts RMS) for full rated power at
4 ohms
1.25
Frequency Response (at 1 watt, 22 Hz - 20 kHz)
+0 dB, –1 dB
Signal to Noise Ratio below rated power (20 Hz to
20 kHz, inputs terminated)
A-weighted, below rated power
No weighting, below rated power
> 100 dB
> 95 dB
Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz
< 0.5%
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB
< 0.3%
Damping Factor (8 ohm): 10 Hz to 400 Hz
> 200
Crosstalk (below rated power)
at 1 kHz
at 20 kHz
–75 dB
–50 dB
Input Impedance (nominal) (balanced,
unbalanced)
20 kilohms, 10 kilohms
Load impedance
Stereo
Bridge mono
4-8 ohms
8 ohms
AC Line Voltage and Frequency Configurations Available (± 10%)
120 VAC 60 Hz
100 VAC 50/60 Hz
220 VAC 50 Hz
230-240 VAC 50 Hz
Ventilation
Flow-through ventilation from front to back
Cooling
Internal heat sinks with forced-air cooling
Air Volume Requirements (per minute
per unit)
80.15 ft3 (2.27 m3)
Dimensions: Width, Height, Depth
XLS 202, 402, 602, 802: EIA Standard 19"W (EIA RS-310-B) x 3.5” (8.9 cm) H x15.2" (38.6cm) D.
XLS 5000: EIA Standard 19"W (EIA RS-310-B), 5.25” ( 13.3 cm) H x 15.5” (39.5 cm) D.
Net Weight, Shipping Weight
XLS 202: 23.0 lb (10.4 kg), 28.0 lb (12.7 kg)
XLS 402: 25.7 lb (11.7 kg), 30.7 lb (13.9 kg)
XLS 602: 29.0 lb (13.2 kg), 34.0 lb (15.4 kg)
XLS 802: 35.5 lb (16.1 kg), 40.5 lb (18.4 kg)
XLS 5000: 62.0 lb (27.7 kg), 74.0 lb (33.6 kg)

LinkWithin

Related Posts Plugin for WordPress, Blogger...